Site Information

Workshop

 tools.jpg

Our workshop is fully equipped to cater for all types of cycle service and repair needs whether its a quick tune up for your 3 speed internal hub gear, specialist Rohloff hub or Shimano DI2 high speed racing machine. Our team of Cytech qualified technician's will give your cycle all the attention it needs to ensure it keeps performing. We have a simple approach to work scheduling - no need to make a booking just bring your bike along and most basic work is completed for either same day or next day collection. Should you require further info on services provided please use our Contact Page

Having trouble finding the time to get your bike serviced or repaired? Won't fit in the car or just too busy to call in? Contact us and we can arrange a time to collect your bike and return it to your required location if necessary (This service has an additional charge dependent on distance to travel).
 
Service Packages
THESE ARE LABOUR CHARGES ONLY, ANY NEW PARTS FITTED WILL BE CHARGED EXTRA


Bronze Service £18.00
We recommend this for the casual cyclist who wishes to make sure that everything on their cycle is safe and correctly adjusted. This service is usually completed the same or following day depending on work load and availability of spares.

-Set and adjust brakes
-Set and adjust gears
-Adjust hub bearings                                       
-Adjust headset
-Check tightness of all components
-Lubricate where necessary


Silver Service £50.00
We recommend this for the more frequent cyclist, particularly if used off-road. This is recommended when a more detailed inspection and adjustments are required. This service is usually completed within 2 days depending on work load and spares availability.

-Set and adjust brakes
-Set and adjust gears
-Re-grease hub bearings
-Adjust headset
-Check tightness of all components
-Lubricate where necessary
-Remove all brakes from pivots, inspect, clean and refit adjusting as necessary.
-Degrease chain & cassette
-Clean and inspect all drive components for wear


Gold Service £75.00
We recommend this as a pre-winter/spring service for the all year round cyclist. This service is usually completed within 3 days depending on work load and spares availability.

-Strip cycle to bare frame
-Wheels tensioned & trued
-Inspect all bearing races
-Clean & inspect all drive components for wear
-Reassemble cycle, greasing bearings

Please ensure that your bicycle is clean – We have a surcharge for DIRTY bikes

Please note any extra work required will not be carried out without prior approval. For any work you can set a maximum cost beyond which we will contact you for agreement on the way forwards.

Work on front & rear suspension units is NOT INCLUDED in the standard services. This is charged extra on a case by case basis as some shock units need to be sent to the service agents for servicing.

All charges include VAT. 



Suspension Servicing

We are Fox suspension service agents and our qualified Fox-trained technician's perform the majority of service repair work in house, whether its a full unit service or wiper seal service. 
Due to the constant changes of design in models from Rockshox and Marzochi we find it more effective to forward these units to the respective manufacturer service agents as keeping a stock of all model spares is impractical.



Fox Service Packages

Basic Wiper Seal/Lower leg service
(FIT and O/Cartridge models)

   

Remove lower stanchions and wiper seals, clean and inspect for wear and re-lubricate wiper seals

 

(Normally Next Day)

All forks  £40.00
Full Fork Service for 32, 34 and 36mm forks    

Full strip and clean entire fork

Inspect for wear

Refill damper fluid

Replace dust seals/Foam rings/Oil seals

Stanchion polish and re-lubricate

Reassemble fork unit

(Normally 2 Day turnaround)

Coil Sprung                        

 

Float Air Sprung    

 

Talas Air Sprung  32 and 36mm

 

Talas Air Sprung 34mm   

 

£80.00

 

 

£85.00

 

£100.00

 

 

£105.00

 

Rear Shox    

Strip and rebuild air can

Replace “O” rings and seals

Lubricate unit

-          Any works to rebound damper unit will require unit to be sent off to Fox at additional cost that will be dependent on the unit - costs will be advised after Fox inspection

 

(Normally Next Day)   

DHX RC4

 

RP23/2 Air can Service

 

DRCV Air can Service

 

£95.00

 

£55.00

 

£70.00

 

 

All spares and replacement parts unless indicated will be charged as additional items and will be genuine Fox service parts.